Laser fax
Canon I-Sensys fax L-140 Has been manufactured since 2008 Uses Public Switched Telephone Network (PSTN) Paper Sheet Fed Transmits documents max. in…

Soundscape recorded in the control room of the Płaszów Sewage Treatment Plant. It is fitted with operator stations and a synoptic table to monitor and control the processes at the treatment plant.
The recording was made at the Płaszów Sewage Treatment Plant. This is one of two mechanical-biological treatment plants belonging to Miejskie Przedsiębiorstwo Wodociągów i Kanalizacji S.A. in Krakow. The sewage treatment plant in Płaszów serves around 500,000 inhabitants and treats an average of 165,000 m3 of sewage per day.
First, the sewage is pre-treated mechanically: solid impurities are retained on coarse and fine grids, sand is removed in a sand trap, sediment settles in the primary settling tanks. Mechanically treated sewage is channelled to biological reactors where the processes of removing organic compounds, nitrogen and phosphorus using the biomass of bacteria, protozoa and higher organisms (the so-called activated sludge) take place. Then they go to secondary settling tanks where active sludge is separated from the treated sewage. Sewage which has been treated and is now safe for the ecosystem is discharged into the Drwina River. Sludge from the purification process is used to produce biogas which powers electricity generators. Finally, after dewatering the sludge is incinerated at the Sludge Thermal Treatment Station.
The information comes from: https://osplaszow.wkraj.pl/#/62657/0
Sound recording: Monika Widzicka
Photo: Piotr Żabicki
Canon I-Sensys fax L-140 Has been manufactured since 2008 Uses Public Switched Telephone Network (PSTN) Paper Sheet Fed Transmits documents max. in…
The sound of a stationary diesel locomotive idling in front of the coalmine entrance. It is a special version of a typical…
Windy day in the fishing harbour of Gislövsläge. Small waves hitting the hull of a small fishing boat. Sound recordist: Torsten Nilsson…
The “slit machine”, made by Adam Baumüller GmbH in the 1990s, uses a circular saw to put the slits into the knife…