Square in front of the Corpus Christi church – the bells
A recording of the bells from the Corpus Christi church. It was made at noon in the church square. In the centre…

The soundscape registered in the Felczyńscy Bell Foundry in Taciszów (Poland), i.e. the facility producing bells.
Production of a classic bell is a long-lasting process as most works are performed manually. Preparation of a clay mold lasts several months, so its subsequent layers have enough time to dry. Ready molds are buried in a hole in the ground, and carefully filled in. There is a drain pipe built above, which directs liquid metal. The casting is prepared from gunmental, i.e. alloy with 22% of tin and 78% of copper. The metal is melted in a shaft furnace. It needs to reach the temperature of 1200 Celsius degrees. The flooded molds remain in the casting pinhole for 3 days, until they cool down. The casts dug out from the holes are polished, and the first bell's trial is performed in the meantime.
Bells in the Felczyńscy Bell Foundry are produced with foundry methods, practiced from Renaissance. Any modernizations are connected with application of electric tools that stir the clay and polish the bells. The first Bell Foundry in the Felczyńscy family was established in 1808. Since then, the intergenerational transfer of craftsman traditions has taken place.
Sound recordist: Monika Widzicka
Photographer: Piotr Leszczyński
A recording of the bells from the Corpus Christi church. It was made at noon in the church square. In the centre…
A group of Togolese protesters chose the World Climate Conference in Bonn (COP23) as an occasion to protest against the Togolese president…
The sound of Klima engine in operation. The recording was realized in the National Museum of Agriculture and Agricultural-Food Industry in Szreniawa…
On this recording a needle loom can be heard in operation. The needle loom was built in the 1980s and is now…